Adhesives
17
POLIFIX
Exterior
Polifix Grooved Decorative Plaster
White, cement-based decorative finishing plaster with a textured mineral appearance for external thermal insulation and façade systems.
Strong Adhesion
Long Lasting
Professional Use
Construction System
POLIFIX
Technical Specifications
Fresh mortar bulk density
≥ 1000 kg/m³
Material retained on 1 mm sieve
≤ 0.0%
Flexural strength
≥ 3 N/mm²
Compressive strength
≥ 7 N/mm²
Adhesion to thermal insulation board
≥ 0.08 N/mm²
Water absorption after 30 minutes
≤ 5 g
Water absorption after 240 minutes
≤ 10 g
Bond strength to substrate
≥ 0.5 N/mm²
Reaction to fire class
A1
Temperature resistance
-30°C to +60°C
POLIFIX
General Information
White, cement-based decorative finishing plaster with a textured mineral appearance for external thermal insulation and façade systems.
Suitable for external thermal insulation systems and properly levelled base-coat plaster surfaces.
Can be applied as a decorative finish over interior and exterior plastered surfaces.
The substrate must be free from dust, dirt, oil and residues that may reduce adhesion.
Surface defects should be repaired with Polifix Repair Mortar.
The substrate must be cured, sound and level.
Where necessary, dampen or prime the substrate before application.
Ambient temperature must be between +5°C and +35°C.
Do not apply under direct sunlight, strong wind, on hot surfaces or where frost is expected.
Appearance: Grey powder
Shelf life: See storage conditions.
Packaging: 25 kg Kraft bag; 80 bags per pallet, total 2000 kg
Properties
Pot life: maximum 1.5 hours
Working time: maximum 40 minutes
thickness: 2 mm
Consumption: approximately 3-5 kg/m²
