Exterior
03
POLIFIX
Plaster Systems
Polifix Cement-Based Ready Plaster
Cement-based ready-mixed base plaster for manual application on interior and exterior brick, aerated concrete, concrete, exposed concrete, pumice block and masonry surfaces.
Strong Adhesion
Long Lasting
Professional Use
Construction System
POLIFIX
Technical Specifications
Compressive strength
CS IV (≥ 6 N/mm²)
Dry bulk density
1500 ± 300 kg/m³
Thermal conductivity
Table 2 T1 ≤ 0.57 W/mK (P=90%)
Bond strength
0.3 N/mm² FP:A
Capillary water absorption
W0 ≤ 0.5 kg/m²·min⁰·⁵
Water vapour permeability coefficient
≤ 30 µ
Reaction to fire class
A1
Temperature resistance
-30°C to +60°C
POLIFIX
General Information
Cement-based ready-mixed base plaster for manual application on interior and exterior brick, aerated concrete, concrete, exposed concrete, pumice block and masonry surfaces.
The substrate must be free from dust, dirt, oil and other residues that may reduce adhesion.
Surface defects should be repaired with Polifix Repair Mortar.
Porous substrates should be dampened before application.
The substrate must be cured, sound and level.
Ambient temperature must be between +5°C and +35°C.
Do not apply to frozen, thawing or frost-risk surfaces.
Do not apply under direct sunlight, strong wind or on hot surfaces.
tools: hand mixer, steel trowel, finishing trowel, straightedge, mesh and sponge
Appearance: Grey-white powder
Shelf life: See storage conditions.
Packaging: 25 kg Kraft bag; 80 bags per pallet, total 2000 kg
Storage: Store indoors, away from direct sunlight and moisture, with bags protected from floor contact. Under suitable conditions, the product can be stored for 12 months from the production date.
Properties
Pot life: maximum 3 hours
Working time: maximum 20 minutes
thickness: 10-30 mm
Maximum coat thickness: 20 mm
Waiting time between coats: minimum 1 day
Maximum primer coat thickness: 10 mm
Waiting time after primer coat: 30 minutes
Mixing ratio: 6-6.5 L water / 25 kg powder
Consumption: approximately 10-12 kg/m² for 10 mm thickness
